When it comes to webbing on the back of a chair or inside arms and wings, it’s a little different from the seat. Unlike seats, where you often weave horizontal and vertical strips for extra support, these parts usually get a simpler setup. Here’s why.

One Direction for Chair Backs

One direction of webbing strips is the most common method for chair backs - either vertical or horizontal. There is usually no need to put webbing in both directions. Single direction gives the necessary structure, keeping the padding from sagging and ensuring that the chair back has a nice, consistent feel. 

Horizontal Webbing for Rolled Arms

On rolled arms, horizontal webbing is generally preferred. Horizontal strips work well here because they conform nicely to the shape of the arm, supporting the padding without adding bulk. For rolled arms, secure your strips from one side of the arm frame to the other, keeping them nice and taut but without over-stretching, which can lead to early wear and tear.

When to Make an Exception

As always, some chairs may have unique designs or need a bit more support. If you’re working with an especially large chair back or a heavy padding material, you might want to add second directional strips. But for most pieces, sticking to one directions webbing on backs, and horizontals on rolled arms will serve you well.